Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Englewood
If you’re planning a new garage door in Englewood, the first thing we do is measure, not guess. This town has too many non-standard openings for off-the-shelf sizing to work reliably. We handle single-car doors, double-car doors, custom builds, and opener installation, all measured and priced in writing before anything is ordered. Our technicians have up to 9 years of experience and know how Englewood’s older core and newer edges differ. Call (877) 542-4141 for a free estimate and a written price. We’re a garage-door-only specialist, which matters more here than most places.
Why Englewood Homeowners Call Centennial Garage Door Repair Pros for Garage Door Installation
Englewood has a split personality. The older inner-ring streets in 80110 and 80113 carry mid-century ranch and bungalow housing with shallow, single-car garages, while the southern and eastern edges of 80111 and 80112 hold 1980s-through-2000s two-car attached garages and newer townhome rows. That split is the reason a single approach to installation falls apart. Our whole service arc is built for it: repair, opener repair, spring repair, installation, and emergency response under one name, so a job that starts as a door swap and turns into a spring upgrade doesn’t send you hunting for a second company.
We specialize in garage doors only. Every technician’s training is concentrated on this trade rather than spread across plumbing, HVAC, and electrical work, and it shows on premium doors where tolerance and hardware matching decide whether the door runs quietly or binds by the second season. If you want a garage door installation team that reads the opening before recommending hardware, that’s us. Serving Englewood means we work with both housing types regularly.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Englewood
New Door Installation in Englewood
Most new door installations in Englewood start with a measurement, because the town’s post-WWII core is full of openings that don’t match modern catalog sizes. We compare your opening, headroom, and spring setup before ordering, then handle the install and the opener pairing as one job. The written estimate sets the final price, and the price is agreed before work begins.

Single Car Door Installation in Englewood
Single-car garages are the dominant shape in Englewood’s older neighborhoods, and most were framed for 1950s cars rather than modern panels. That means low headroom and sometimes a true 6-foot-6 or 6-foot opening, which calls for low-clearance track and spring configuration rather than a stock kit. We size the door to the opening you actually have.

Double Car Door Installation in Englewood
On the southern and eastern edges of town, including the newer townhome rows, two-car garages with standard 7-foot openings are common. High-cycle, insulated steel doors suit those builds well, and here technicians often pair them with smart or whisper-quiet openers. If you’re in one of the newer builds, installation is usually the straightforward version of this work.

Custom Garage Door Installation in Englewood
Custom is where Englewood gets interesting. A shallow single-car garage with a low headroom and an original 6-foot-6 opening often turns a simple replacement into a custom-order job. We handle the sizing, the spring upgrade, and the track re-engineering that keeps a tighter space working. If you want a carriage-house look or a wood door to match the era of the house, that’s a custom build and we plan it that way.
Trusted Brands We Service in Englewood
We’re factory-familiar with the equipment our customers already own, including Amarr, Wayne Dalton, Craftsman, and Raynor, plus LiftMaster, Chamberlain, Genie, and Clopay. That matters when a new door has to pair with an existing opener or when a spring needs to match an older door’s weight and cycle count. We diagnose by brand-specific logic rather than guessing at hardware. We don’t stock parts on a truck, but we order accurately the first time because we know the systems. If your door or opener is one of these brands, we’re already ahead on the job.
Common Garage Door Installation Problems We See in Englewood Homes
- Custom-size wood doors drying out and warping. Englewood sits on the dry, high-altitude Front Range, where intense UV and wide day-night temperature swings pull moisture out of wood doors. The result is binding and premature spring fatigue, which is why we recommend high-cycle springs even on a like-for-like replacement.
- Off-the-shelf doors that won’t fit older openings. 1950s garages in the core often have true 6-foot-6 or even 6-foot openings, so standard doors won’t clear. Failed DIY installs and costly retrofits follow, which is why we measure first and order second.
- Hail damage on newer steel and fiberglass doors. Spring hailstorms dent steel and crack fiberglass panels, which compromises the weather seal and the door’s insulation value. A hail-damage inspection is a seasonal staple here rather than a rare call.
- Low headroom in the older core. Garages built for 1950s cars need specialized low-clearance track and spring configurations. Generic installers often overlook this and leave a door that scrapes or won’t fully open.
In Englewood’s post-WWII core, a homeowner with a shallow single-car garage often finds that a standard 7-foot sectional door won’t clear the low headroom or fit the original 6-foot-6 opening, turning a simple replacement into a custom-order job. Technicians also encounter undersized torsion springs paired with worn cables and drums, so the installation typically includes upgrading to high-cycle springs and re-engineering the track alignment for the tighter space. On the southern edges, newer townhomes in 80111 and 80112 call for insulated steel doors with high-R-value panels and smart openers, a stark contrast that keeps local installers switching between custom wood-door craftsmanship and high-cycle steel installations.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Installation in Englewood, CO
A typical new door installation in Englewood runs $700 – $2200, and that includes the door, the hardware, and the install labor. Custom doors land in the same range because the sizing and spring work scales with the opening. Opener installation runs $250 – $550. We quote after we’ve measured the opening, because a 6-foot-6 clearance job involves different hardware than a standard 7-foot opening and the difference shows up in the price. All figures are typical estimated ranges; your written estimate sets the final price. Estimates are free, and the price is quoted and agreed before any work starts.
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700 – $2200 |
| Custom Garage Door | $700 – $2200 |
| Opener Installation | $250 – $550 |
| Garage Door Repair (existing door) | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
Spring pricing above is for one spring. A matched pair is usually replaced together, so a pair runs about twice that. Need a door opening again fast? Call (877) 542-4141 for a free estimate.
We Also Serve Cities Near Englewood
Englewood shares its housing patterns with the towns around it, and we serve the neighbors too. We also work in Centennial, Cherry Creek, Greenwood Village, and Four Square Mile, and the same custom-sizing discipline carries over. If you’re just outside Englewood but in the same older-core or new-build category, the job usually looks familiar. One call covers the measurement, the price, and the install.
Serving Englewood, CO – Our Local Coverage Area
We serve Englewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Englewood
No, not safely or correctly. A standard 7-foot door won’t fit a true 6-foot-6 opening, which is common in Englewood’s 1950s-core garages. We measure your actual opening first, then either recommend a custom-sized door or design the low-clearance track and spring setup around what you have. Call (877) 542-4141 and we’ll send someone to measure; estimates are free.
High-cycle torsion springs are the right call for most Englewood installs, especially if you’re replacing a 1950s door with an undersized original spring. The dry, high-altitude climate and the wide day-night temperature swings accelerate spring fatigue, so upgrading the cycle rating extends life and keeps the door balanced. We size springs to the door’s actual weight during the install. Call (877) 542-4141 for a quote.
Spring hailstorms here dent steel and crack fiberglass door panels, which weakens the weather seal and reduces the door’s insulation value. That makes a hail-damage inspection part of the install conversation, not an afterthought. If you’re ordering a new door, we can recommend panel materials that hold up better to local hail. Call (877) 542-4141 to talk it through.
Yes. We install openers from LiftMaster, Chamberlain, and Genie, including smart-integrated and whisper-quiet models, and we pair them with the door so the two work as one system. That matters more in newer Englewood townhomes where a quiet opener under a bedroom wall is the difference between sleeping and not. Opener installation runs $250 – $550 typically. Call (877) 542-4141 for a free estimate.
Wood doors suit older Englewood homes that want an era-appropriate look, but they need more upkeep because intense UV and temperature swings dry them out and cause warping. Steel doors hold up better against hail and need less maintenance, which makes them the more common choice for newer townhomes. Both fall within our typical $700 – $2200 installation range. Call (877) 542-4141 and we’ll recommend based on your opening.
Ready to Price Your Englewood Door?
If you’re in Englewood and thinking about a new door, a custom build, or a smarter opener, the first step is a free measurement and a written price. We size to your actual opening, explain the spring and hardware choices, and quote before any work starts. Call (877) 542-4141 to book a free estimate.
Written by the team at Centennial Garage Door Repair Pros.