Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Centennial?
A new garage door installation in Centennial typically costs between $700 and $2,200, including removing the old door and setting the new one on your existing tracks or new hardware. Most single-car doors land near the lower end of that range, while double doors, insulated doors, and custom sizes push toward the top. The exact figure depends on door size, material, and whether your opening needs any framing or track work, and the written estimate sets the final price.
We’re a garage-door-only company, which means we spend our days on doors and openers rather than splitting time across other trades. That focus matters most on the job that actually determines how your new door feels for the next decade: the install. Call (877) 542-4141 for a free estimate and a straight answer on what your opening needs.
Key Takeaways
- Typical new garage door installation in Centennial runs $700 – $2,200.
- Opener installation, when you add it to a new door, is typically $250 – $550.
- Panel replacement, if only part of your door is damaged, is usually cheaper at $250 – $500.
- Door size, insulation, and window options are the biggest price drivers.
- Our technicians have up to 9 years of experience and work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment.
Garage Door Installation Cost Breakdown (2026)
Here’s how the numbers break down for Centennial homeowners. These are typical estimated ranges, not quotes. Your written estimate is the price you’ll actually pay.
| Service | Typical Estimated Range |
|---|---|
| New door installation (single or double) | $700 – $2,200 |
| Opener installation (added to a new door) | $250 – $550 |
| Opener repair (if you keep your existing opener) | $120 – $320 |
| Panel replacement (partial door damage) | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Cable repair | $130 – $250 |
| Spring repair (one spring) | $180 – $340 |
| General garage door repair | $150 – $600 |
A matched pair of springs is usually replaced together, so a pair costs about twice the single-spring range. If your existing springs are near the end of their life when you install a new door, it’s worth knowing that before the crew arrives, since springs are the highest-stakes repair on any garage door and one you don’t want to handle yourself.
On a full installation, the door itself is the largest line. Labor, hardware, and hauling away the old door make up the rest. Insulated doors, windows, and non-standard widths add cost. If your current tracks are bent or the opening isn’t square, that’s extra work and it shows up in the estimate.
What Affects Garage Door Installation Pricing in Centennial
Two houses on the same block can get very different quotes. These are the factors that move the number the most in the Centennial market.
- Door size. A single-car door uses less material than a double, and that difference shows up directly in the price. Oversized openings for RVs or deep garages cost more again.
- Material and insulation. A basic steel door costs far less than an insulated door with windows or a wood-look composite. Insulation matters more here than in mild climates: Centennial sits at high elevation along the Front Range, where spring hail, fast temperature swings, and cold winter mornings all work on a door, and an insulated door holds up better and keeps the garage warmer.
- Opener condition. If your opener is older or you want a quieter belt-drive unit, plan on the opener installation range on top of the door. We’re factory-familiar with LiftMaster, Chamberlain, Genie, and Craftsman, so we match the opener to the door rather than forcing a one-size unit.
- Existing hardware. New tracks, rollers, and springs add to the total. Sometimes they’re included with the door; sometimes they’re not. Ask so there are no surprises.
- Old door removal. Hauling away and disposing of the old door is part of the job and part of the price. Older wooden doors can be heavier and take more time.
- Access and framing. A tight driveway, a low ceiling, or an opening that needs reframing adds labor. Centennial’s mix of older and newer homes means we see plenty of both.
One local detail worth mentioning: hail season along the Front Range is real, and a steel door with a decent finish handles it far better than a wood door. If you’re choosing between materials and the price is close, ask which one holds up better against hail and sun before you decide. For the full picture of what a proper install involves, see our garage door installation page.
How to Save on Garage Door Installation
You don’t have to pay the top of the range to get a door that works right and lasts. A few practical moves help.
- Get a written, itemized estimate first. Free estimates mean you can compare door, labor, and hardware line by line. Call (877) 542-4141 and we’ll walk you through it.
- Keep your existing opener if it’s healthy. If your current opener is in good shape, you can skip the $250 – $550 opener installation range and put that money toward a better door.
- Consider panel replacement over a full door. If only one section is dented or damaged, panel replacement at $250 – $500 is often far cheaper than a whole new door.
- Choose a standard size and material. Custom widths and specialty materials cost more. Standard steel doors hit the low end of the $700 – $2,200 range.
- Address springs and cables now, not later. If your existing springs are worn, fixing them as part of the install avoids a separate service call down the road.
We connect you with independent local professionals who are licensed and insured as their state requires, and the estimate you get is free and upfront. Ask questions. A good installer will answer them without pressure.
Repair or Replace? How to Decide
Repair is usually the cheaper call when the door structure is sound and only a component has failed. Replacement makes more sense when the door itself is failing, not just a part. Here’s the simplest way to think about it.
- One part, one fix. A broken spring, a snapped cable, or a misaligned track is a repair, not a replacement. Those jobs fall inside the $150 – $600 repair range.
- Damaged section. A single dented or cracked panel goes for a panel replacement at $250 – $500. No need for a new door.
- Widespread rust, rot, or repeated failures. When the door structure itself is failing, a new door at $700 – $2,200 is the better long-term spend.
- You want a different look or better insulation. That’s a replacement decision, not a repair. Worth doing once, done right.
If you’re not sure which way to go, that’s a conversation, not a sales pitch. We tell you what your existing door needs and let you decide.
What to Know Before You Install in Centennial
Permits and code requirements vary by jurisdiction, so check with the City of Centennial’s building department before scheduling a full replacement. Some cities require a permit for a new door or a structural change to the opening, and some don’t. A five-minute call saves a headache later. We can point you toward the right questions, but the permit is between you and the city.
Beyond permits, a few practical prep steps make install day go smoothly:
- Clear the garage floor and the driveway where the old door will come out.
- Know the height of your opening and how much headroom you have above the door.
- Decide your opener plan in advance: keep the existing unit or replace it.
- Confirm the old door will be hauled away. Ask before the crew arrives.
- Make sure the new door matches the opening, not just the garage’s exterior look.
We work on doors and openers from Clopay, Amarr, Wayne Dalton, and Raynor as well as the opener brands we’ve named, so recognition is immediate. Same door, fixed right, on the first trip whenever possible.
If your door fails before your scheduled install and you can’t get the car out, that’s what our emergency service is for. When it won’t open and you can’t wait, call us and we’ll help.
Why Choose a Garage-Door Specialist for Your Installation?
An installation done by a generalist who fits doors between plumbing calls is a different job than one done by a specialist who does nothing else. The track leveling, spring tensioning, and opener travel-limit settings all have to be right together, and the person adjusting them should know that system cold.
Every technician on the work is concentrated on garage doors alone. No HVAC. No electrical. No plumbing. That’s the whole trade. Our technicians have up to 9 years of experience, and our factory familiarity with eight major brands means we diagnose by brand-specific logic, not guesswork.
We offer free estimates, upfront pricing, and a clear written quote that sets the final price. We can work with your insurer if a hail event or storm damage is part of the picture. One call covers repair, opener repair, spring work, installation, and emergency response, so you’re not starting over with a new company when something else needs attention.
FAQs – Garage Door Installation Cost
How much does a new garage door cost in Centennial?
New garage door installation in Centennial typically runs $700 – $2,200 for the full job, including removal of the old door. Single-car doors sit near the low end and double or insulated doors near the top. Call (877) 542-4141 for a free estimate.
Is it cheaper to repair or replace a garage door?
Repair is usually cheaper for a single failed part: spring repairs run $180 – $340 for one spring, and panel replacement is $250 – $500. A full replacement at $700 – $2,200 makes more sense when the door structure itself is failing. Call (877) 542-4141 and we’ll tell you which your door needs.
How much does opener installation cost in Centennial?
Opener installation typically runs $250 – $550 when added to a new door job. If your existing opener is healthy, you can skip that cost and keep what you have. Call (877) 542-4141 to talk through the options for your specific opener.
Can you come today for an installation?
Estimates are free and we aim to get out quickly, with same-day service often available and fast dispatch from 7am to 7pm. Full installations are usually scheduled rather than done on a same-day basis. Call (877) 542-4141 to check availability and book.
Do I need a permit to install a garage door in Centennial?
Permit rules vary by jurisdiction, and some cities require one for a new door while others don’t. Check with the City of Centennial’s building department before you schedule. We’ll work around whatever your city requires. Call (877) 542-4141 with questions on the install side.
What brands do you work on for installation?
We work on installed door and opener systems from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That brand familiarity means fewer surprises during the install and a tighter final fit. Call (877) 542-4141 for a free estimate.
Ready for a Straight Answer on Your Door?
A new garage door is a real investment in the biggest moving part of your home, and the estimate you get should be clear, itemized, and free. We keep the pricing upfront, back the work with a satisfaction guarantee, and connect you with independent local professionals who are licensed and insured as their state requires. Whether you’re weighing a $700 basic door against a $2,200 insulated upgrade or figuring out whether a $250 – $500 panel swap gets you by for another few years, we’ll help you land on the right call. Call (877) 542-4141 today for a free estimate, and we’ll take it from there with clear pricing from the start. If you’re starting your search, this Centennial Garage Door Repair Pros page is where we lay out the whole service picture.
Written by the team at Centennial Garage Door Repair Pros.
Pricing reflects the Centennial market as of 2026. Centennial Garage Door Repair Pros offers free estimates – call (877) 542-4141.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Heather Hayes"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Rafael Delgado"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Todd Ziegler