Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Parker?
Garage door repair in Parker typically runs $150 to $600, and most jobs land in the middle of that range. A broken spring is usually $180 to $340 for one spring, while a brand-new door runs $700 to $2200 installed. What you actually pay depends on the part, the door, and the brand of opener or hardware you have, and the written estimate you get before any work starts sets the final price.
Key Takeaways
- Most garage door repair in Parker costs $150 to $600.
- One spring is $180 to $340. A matched pair, which is usually replaced together, is about twice that.
- A new door installed is $700 to $2200.
- We give free estimates and upfront pricing, so you know the number before we touch the door.
- Emergency service is a core offering here, not an add-on.
Parker sits in Douglas County on the Front Range, and that location shapes what fails on a garage door more than most homeowners realize. Our hot, dry summers and cold, snowy winters swing the temperature a lot across a single year, and that swing is hard on springs, roller bearings, and the seals around the door. If your door won’t open in the morning or won’t close at night, call us at (877) 542-4141 and we’ll get you scheduled.
Centennial Garage Door Repair Pros is a garage-door-only operation. That matters when you’re pricing a repair, because the technician who shows up works on doors all day, every day. Our technicians have up to 9 years of experience, and we know the equipment from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor by how it actually fails, not by what a manual guesses. You can read more about how we run the business on our Centennial Garage Door Repair Pros page.
Garage Door Cost Breakdown (2026)
Here are the typical estimated ranges for garage door work in Parker, based on the Parker market as of 2026. These are estimates, not a quote. The written estimate we give you on site is the price.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
That spring range is for one spring. Most doors have a matched pair, and when one breaks the second is nearly as worn, so we usually replace both at once. A pair costs about twice the single-spring range. It’s the honest way to price spring work: putting one new spring next to an old one just means you’re back on the phone in a few months.
What pushes a bill toward the top of a range? A heavy insulated door, a stuck door that’s been forced, a bent track that needs more than a nudge, or a panel that has to be matched to a discontinued Clopay or Amarr profile. What keeps it low? A simple roller and lube job, a sensor that just needs alignment, or an opener fix that’s really a stripped gear you can swap. We diagnose by brand first, because a Genie and a Chamberlain fail in different places.
What Affects Garage Door Pricing in Parker
The price range on a garage door job isn’t random. A handful of local and technical factors move it up or down, and knowing them helps you read an estimate with confidence.
- Door size and weight. A single-car door costs less to re-spring than a wide double-car door, because the springs carry more load. Insulated doors weigh more than uninsulated ones, and that extra weight shows up in the spring spec and the labor.
- Brand and part availability. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. When a part is a standard, current-profile item, the job is straightforward. When a panel or opener board has to be sourced for an older or discontinued model, that adds time and cost.
- Whether it’s a repair or a replacement. “Same door, fixed right” is usually the cheaper path. Replacing a cable, a roller, or a torsion spring on a sound door almost always costs less than a new door, and it keeps the door you already own.
- Type of failure. A sensor knocked out of alignment is a quick fix. A snapped torsion spring or a cable that’s come off the drum is a bigger job that has to be done with the right tools and the right safety gear. Springs are the highest-stakes repair on any garage door.
- Access and clearance. A tight garage with a low ceiling or stuff stacked under the door adds handling time. Clear space in front of and under the door helps the job go faster.
- Emergency timing. A door that won’t close at night is a security problem you can’t sit on. Emergency service exists precisely for that, and it’s a genuine part of what we do, not a seasonal special.
One Parker-specific note: our freeze-thaw cycle is rough on the bottom seal and on metal tracks that shift with the ground. A door that drags or sticks in January often traces back to a track that moved a fraction of an inch, not to a failed opener. If your door is grinding and you’re pricing an opener replacement, it’s worth having the track and rollers checked first. You may be looking at a $120 to $240 realignment rather than a new opener.
How to Save on Garage Door Pricing
The best way to keep a garage door bill down is to catch problems early and get more than one thing handled in a single visit. Here’s how homeowners in Parker tend to keep costs in check.
- Get the free estimate first. We give free estimates and upfront pricing, so there’s no guessing and no surprise line items. Call (877) 542-4141 and we’ll walk you through what the job should run.
- Replace springs in pairs. When one spring goes, the second is close behind. Doing both at once in one visit costs less in labor than two separate calls, even though a pair costs about twice the single-spring range.
- Bundle small fixes. If you’re already having a cable replaced, having the rollers swapped or the door balanced at the same time saves a second trip charge.
- Fix, don’t replace, when the door is sound. A panel, a track, or an opener can usually be repaired on a door that’s otherwise in good shape. Replacement makes sense when the door is bent beyond straightening or the panels are no longer available.
- Handle the easy stuff yourself. Clearing the garage so the door has room to move, and keeping the tracks clean of grit, both help. But leave spring, cable, and opener-board work to a trained technician.
- Ask about a same-day slot. If the door is stuck, getting it fixed before it damages the opener or the door itself can save you a bigger bill later.
We specialize in garage doors only, which means we don’t juggle plumbing and HVAC calls between door jobs. That focus is why our pricing is straightforward and why one call covers it: repair, opener repair, spring repair, installation, and emergency response. If you’re comparing us to a general handyman, the difference shows up in how fast a tricky brand-specific problem gets solved. For related work, see our pages on garage door spring repair and opener repair.
If a door has failed and you can’t get it to move, it’s worth understanding what’s actually broken before you price anything. Our guides on broken cable repair and off-track door repair walk through the common failures. For full door swaps, our garage door installation page covers the process and what changes the price.
FAQs – Garage Door Cost in Parker
How much does garage door repair cost in Parker?
Garage door repair in Parker typically costs $150 to $600, depending on the part that failed and the door. A single spring runs $180 to $340, a cable runs $130 to $250, and a roller set runs $110 to $220. Call (877) 542-4141 for a free estimate that fits your specific door.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper than replacement when the door itself is still straight and its panels are available. A repair runs $150 to $600, while a new door installed runs $700 to $2200. Replacement only makes sense when the door is badly bent, the panels can’t be matched, or the door is failing in several places at once. Call (877) 542-4141 and we’ll tell you which path your door points to.
How much does spring repair cost in Parker?
Spring repair is $180 to $340 for one spring. Because most doors have a matched pair and both wear at the same rate, we usually replace them together, so a pair costs about twice that range. Springs are the highest-stakes repair on a door, so this is not a job to attempt without the right tools. Call (877) 542-4141 for an exact quote on your door.
Can you come today if my door won’t close?
Yes, emergency service is a core part of what we offer, not a special request. A door that won’t close at night leaves your home open, and we treat that with the urgency it deserves. Call (877) 542-4141 to check today’s availability and get a free estimate.
How much does a new garage door cost installed in Parker?
A new garage door installed in Parker runs $700 to $2200, with size, material, insulation, and brand all moving the price. We work with Clopay, Amarr, Wayne Dalton, and Raynor, among others, so we can match the door to your opening and your budget. Call (877) 542-4141 for a free on-site estimate.
Does the brand of my opener change the repair price?
It can. An opener repair runs $120 to $320, and the range covers LiftMaster, Chamberlain, Genie, and Craftsman systems. We know where each brand tends to fail, which usually means a faster diagnosis and a more accurate estimate. Call (877) 542-4141 if your opener is acting up.
Get a Free Estimate on Your Garage Door in Parker
Pricing a garage door job shouldn’t feel like a guess. We give free estimates, upfront pricing, and we keep our focus on one trade so your repair gets done right the first time. Whether you need a spring replaced, an opener repaired, a new door installed, or emergency service because the door won’t open, one call covers it. We’re familiar with every major brand, from LiftMaster to Raynor, and our technicians have up to 9 years of experience working on them. Call (877) 542-4141 for a free estimate and get your door working again. For nearby service, see our Castle Rock, Centennial, Littleton, Highlands Ranch, and Aurora pages. You can also read more on our garage door repair page and our emergency garage door service page.
Written by the team at Centennial Garage Door Repair Pros.
Pricing reflects the Parker market as of 2026. Centennial Garage Door Repair Pros offers free estimates – call (877) 542-4141.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Heather Hayes"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
- Rafael Delgado"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Todd Ziegler